Many people now own smartphones that run on batteries. Calibrating the newly installed Smart Battery is essential if you are replacing the battery due to possible damage or deterioration. The point of this is that your phone will show an accurate reading of the state of charge.
Calibration is a measurement technique in which measurements provided by a device under test are compared against a calibration standard of known accuracy. Standard equipment can be batteries from the same manufacturer.
Newly purchased batteries do not have any adjustments. You might worry that the person doing the calibration might tamper with your battery specifications. The person compares to a standard cell phone battery.
Also, phone calibration ensures you have a quality battery installed. There are other reasons to perform phone calibration:
Phone battery is new.
The cell phone battery may have been modified or repaired.
When the battery is stored for a long time
When the working time of the battery is over
After or before critical measurements are performed on the battery.
The battery may have been damaged by vibration, shock or physical damage. These events tend to potentially compromise the integrity of the battery calibration.
If you observe that your battery’s state of charge is not normal
A country’s policy may require all new batteries to be calibrated according to a set standard.
In short, calibrating your Android battery or any phone battery means getting the OS to correct some broken information so that it describes the actual battery level.
Should you calibrate your phone battery?
The answer is yes. Phone battery calibration is very important if you want the accuracy of your phone’s state of charge. The manufacturer recommends performing the calibration process after 2 to 3 months of battery life. When you use your phone, your phone’s battery drains and its capacity decreases, depending on a number of factors, including heat, usage, and age.
Many people complain that their phone battery drains faster. Your battery may discharge from fifty percent to zero percent in a short period of time. Another situation is when plugging in a charger. The phone battery will be fully charged. When you unplug it and watch charging, it shows 90% or even less. If it’s not damaged, your phone may not be properly calibrated.
The danger of not calibrating your phone’s battery is that it could shut down immediately without warning. Imagine you are talking to someone important and this happens. You will get frustrated and may end up losing what you are looking for. Worst case scenario is when you’re interviewing online for the job you aspire to; then your phone shuts down. You can imagine the disappointment. Therefore, it is very important to calibrate the battery regularly.
If your phone’s battery exhibits any of the following symptoms, you might want to calibrate it as well:
Displays a charge percentage for a long time when plugged in
Failed to charge
Phones may report battery issues via pop-ups.
Shows 100% charge, then drops to a low percentage after unplugging the charger.
>>>>>>>>>>Phone battery
Thanks for reading, hope it helps!
Friendly reminder: If you need to replace the battery, this battery store will be a good choice: www.batteriesfast.co.uk