Whether you’re traveling a lot or just relaxing, your battery can drain at the worst possible moment. How would you best handle the health of your battery? How do you make your battery last longer for you? In this article, we’ll take a look at the basics and tips for making your battery last longer!
Here are some helpful tips to keep your battery last longer:
As far as the working environment is concerned, the main factor that affects battery life is temperature.
Lithium-ion batteries are generally most pleasing at room temperature around 20 to 25°C. At warmer temperatures, the protective layer inside the battery cracks and should be rebuilt, which absorbs some of the energy limitations the battery has to deliver. What’s more, at cooler temperatures, the chemical reactions inside the battery are delayed. Cold is generally less harmful than heat. So if you decide to put your phone in the sun or shade, the latter might be ideal.
When using or storing lithium batteries, keep away from extreme temperatures, both high and low.
Elevated temperatures can accelerate the degradation of nearly every battery segment and can cause significant hazards, including fire or explosion. If your PC or phone gets noticeably hot while charging, unplug it. Minimize exposure to low temperatures, especially while charging.
Limits how long the battery can be used at 100% or 0% charge.
Very high and low “charge conditions” can stress the battery. Consider using a partial charge to restore the battery to 80% instead of 100%. If this is not possible then unplug the gadget when it reaches 100%. Even charging and discharging at a lower rate tends to be scarier than a full charge without activity. So try not to put too much stress on your battery at any one time.
How do you revive a dead battery?
The vast majority accept that an old or dead battery must be discarded and replaced with another. While this is the main answer for these folks, there is another way you can save cash and get a 100% functioning battery.
Depends on that battery chemistry. If it’s NiMH, give it a high initial current at this point and check if it restores it. If not, you will have to choose to replace the battery. This strategy applies to NiCds. With lithium particles or lithium polymer or lithium iron phosphate, the battery basically kills when the voltage drops. Try giving it a very low current, around 20 mA. Sometimes give it a 1 A shock for a moment, then it goes back to trickle. This might bring it back to life. But if it recovers and never gets as good as new, it will be a zombie battery. If there is even 0.5V on the dead lithium particles, there is a good chance of recovery. At 0 V, almost impossible.
>>>>>>>>>>>Battery
Thanks for reading, hope it helps!
Friendly reminder: If you need to replace the battery, this battery store will be a good choice: www.batteriesfast.co.uk